Bus compatible with the series S200C units, the S200 I/O's can be mixed with them in any order on the same DIN rail. The units in the I/O system are intended for use in industrial environment and they fulfil the EMC directive 89/336/EEC. They may be mounted centrally at the Central System or remotely and interconnected to the controller via various field buses.
Configuration of the I/O units' functions and measuring ranges is performed using the system software. LEDs are located on the front indicating the signal status. It is possible to remove/insert the units under system power on. Power for the internal logic is provided on the serial bus via the adapter for the I/O system.
The inputs and outputs are filtered and galvanically isolated by optocouplers. SattCon 200, Advant Controller 250 and SattLine 200 Series uses the units of Series S200C to varying extents, in various combinations. S200 I/O life cycle status
S200 I/O is in the Active life cycle phase.
When migrating a system to System 800xA, the S200 I/O modules can be kept.