Global site

ABB's website uses cookies. By staying here you are agreeing to our use of cookies. Learn more

Type SAM

Single piece, liquid tight, high temperature 316 Stainless Steel fitting suitable for food zone non-contact
areas

  • Unique single piece design
  • 316 Stainless Steel 
  • Face seal materials adhere to FDA (Food and Drug Administration) and European Food Contact regulations
  • IP67, IP68 & IP69 protection
  • Approvals CE, BS EN 61386-1,-23, NSF14159-1-2014, NSF169-2009, UL514b 
  • Multiple thread type Metric/NPT
  • Very high corrosion resistance
  • Very high chemical resistance
  • Very high fatigue life
  • Temperature range - Static Applications: -50ºC to +130ºC
    Temperature range - Moving Applications: -5ºC to +150ºC

Typical applications

  • Suitable for food zone non-contact areas
Parts list
Documents
Related products
Additional info
Contact us
Conduit Size (A) Nominal Dimensions (mm) GID code
METRIC Part no: Metric (mm) US (Trade size) B C D E F G
SPL16/M16/SAM 16 3/8” 12.0 32.8 30.0 31.9 14.0 10.5 7TCA296120R0043
SPL20/M20/SAM 20 1/2” 12.0 35.6 32.0 35.0 18.0 14.5 7TCA296120R0044
SPL25/M25/SAM 25 3/4” 12.0 43.0 38.0 41.0 23.0 18.3 7TCA296120R0045
SPL32/M32/SAM 32 1” 12.0 51.5 45.0 49.0 30.0 24.1 7TCA296120R0046
SPL40/M40/SAM 40 1 1/4” 12.0 53.3 57.0 61.5 38.0 32.7 7TCA296120R0047
SPL50/M50/SAM 50 1 1/2” 12.0 60.2 64.0 69.0 48.0 37.7 7TCA296120R0048
SPL63/M63/SAM* 63 2” 12.0 71.4 80.0 87.0 61.0 49.0 7TCA296120R0049


* : Currently does not conform to UL514b

  1. Note: A flat surface greater than diameter “E” is required around the knockout on the box or enclosure for the face seal of the NPT
    fitting to create a liquid tight seal. (The NPT threads alone will not provide a liquid tight seal when installed in a female NPT hub)
  2. Note: Parts are maintanence free, face seal can be replaced if damaged.
  3. Note: Parts are fully cleanable and will maintain full ingress protection under normal wet cleaning condtions
Conduit Size (A) Nominal Dimensions (mm) GID code
NPT Part no: Metric (mm) US (Trade size) B C D E F G
SPL16/038/SAM 3/8” 16 15.2 43.0 30.0 31.9 14.0 10.5 7TCA296120R0053
SPL20/050/SAM 1/2” 20 19.8 43.2 32.0 35.0 18.0 14.5 7TCA296120R0054
SPL25/075/SAM 3/4” 25 20.1 46.3 38.0 41.0 23.0 18.3 7TCA296120R0055
SPL32/100/SAM 1” 32 25.0 57.9 45.0 49.0 30.0 24.1 7TCA296120R0056
SPL40/125/SAM 1 1/4” 40 25.6 60.4 57.0 61.5 38.0 32.7 7TCA296120R0057
SPL50/150/SAM 1 1/2” 50 26.0 64.7 64.0 69.0 48.0 37.7 7TCA296120R0058
SPL63/200/SAM* 2” 63 26.9 74.1 80.0 87.0 61.0 49.0 7TCA296120R0059


* : Currently does not conform to UL514b

  1. Note1: A flat surface greater than diameter “E” is required around the knockout on the box or enclosure for the face seal of the NPT
    fitting to create a liquid tight seal. (The NPT threads alone will not provide a liquid tight seal when installed in a female NPT hub)
  2. Note2: Parts are maintanence free, face seal can be replaced if damaged.
  3. Note3: Parts are fully cleanable and will maintain full ingress protection under normal wet cleaning condtions
  • Contact us

    Submit your inquiry and we will contact you

    Contact us