ESP CCTV Series

The ESP CCTV Series is a combined Category D, C, B tested protector (to BS EN 61643) suitable for coaxial CCTV cables with BNC connectors (ESP CCTV/B) or twisted pair CCTV lines (ESP CCTV/T) on systems with either an earthed or an isolated screen.

Not suitable for use on broadcast, satellite or cable TV systems. For use at boundaries up to LPZ 0 to protect against flashover (typically the service entrance location) through to LPZ 3 to protect sensitive electronic equipment.

Features & benefits

Very low let-through voltage (enhanced protection to IEC/BS EN 62305) between all lines - Full Mode Protection
Full Mode design capable of handling partial lightning currents as well as allowing continual operation of protected equipment
Repeated protection in lightning intense environments
100 MHz bandwidth prevents the degradation of high frequency signals
Low in-line resistance to minimize unnecessary reductions in signal strength and maximizes signalling distance
Very low reflection coefficient/VSWR ensure that the protector doesn’t disrupt system operations
Suitable for either earthed or isolated screen systems
Sturdy, conductive ABS housing for 2 way shielding - preventing emissions & providing signals with immunity from external interference
Convenient holes for flat mounting on base or side
Built-in DIN rail foot for easy installation on a top hat DIN rail
ESP CCTV/T has colour coded terminals for a quick and easy installation check - grey for the dirty (line) end and green for the clean end
Substantial earth stud to enable effective earthing
Integral earthing plate for enhanced connection to earth via CME kit
ESP CCTV/B has Network Rail Approval PA05/02510. NRS PADS reference 086/023410