SWAPs creation tool

SWAPs is a maintenance program based on 4 inputs: environmental and operational conditions, age of the equipment, previous maintenance carried out, and presence of monitoring and diagnostic solutions.

With this tool you will be guided to provide such information, getting at the end the maintenance plan for your line-up.

The form is organized in three sections:

Each field has a question mark next to its name, which will explain you which input is required. If this is the first time you use this tool, please download the PDF guide you can find at this link, to have it available in case of doubts.

Environmental conditions

Operational conditions

For the following fields, related to operational conditions, please fill in with the highest data among the different panels of the line-up (e.g. most loaded panel, oldest breaker, etc.). Only for frequency of operations, indicate the one with lowest frequency.

Present mechanical lifetime

Age of components (number of years)

Current loading (%)

Voltage loading (%)

Short circuit current interruption

Frequency of operation

Others conditions

Presence of any obsolete device

Monitoring and Diagnostic equipment installed on the switchgear

Installed relay family

Preventive maintenance on the switchgear

UPS Conditions

UPS manufacturer

Is the UPS system located in the same room of the switchgear?

Are batteries located in a separate room?