Emerson Provox DCS migration to ABB's 800xA at Arkema chemicals in St Auban, France

ABB is unique in handling technically challenging third-party system modernizations without operation shutdown

Share this page

Modernizing the control systems of its major manufacturing plants is helping the Arkema Group maintain its leading position in the speciality chemicals business. Learn why evolving the installed Emerson Provox control system to ABB’s 800xA was an obvious choice.

Leading special chemicals producer

The Arkema Group is France’s leading chemicals producer and a global player in state-of-the-art specialty chemicals with internationally recognized brands and products.

Currently Arkema is present in over 40 countries and has approximately 13,800 employees. In Europe, where the group is a major producer of vinyl products, it operates around 80 industrial facilities.

At its St Auban site in France, Arkema produces PVC from chlorine and ethylene via a batch process involving five autoclaves.

Main facts

Industry Chemical
Customer Arkema St Auban
Country France
Solutions

Emerson Provox DCS evolution to
System 800xA architecture

Strong commitment to modernization

To remain competitive in an increasingly tough business environment, Arkema has a clear policy of modernizing its most efficient plants to increase their manufacturing capacity and secure a reliable, cost-effective production.

ABB has been providing automation control products and solutions to Arkema’s production plants for many years. Around 75,000 I/Os (inputs/outputs) installed at over 10 sites is good proof of this.

In addition, Arkema has made a strong commitment to ABB regarding the modernization of its plants, and in particular the evolution of its third-party heritage control systems to today’s world-leading DCS – System 800xA.
Arkema has a clear policy of modernizing its most efficient plants to increase their manufacturing capacity and secure a reliable, cost-effective production

Previous experience migrating Honeywell TDC 3000 to ABB

Evidence of Arkema's commitment to modernization, and the ability of ABB to respond to it, can be seen in the highly successful migration of Arkema’s Saint Menet plant near Marseille

Saint Menet’s Honeywell TDC 3000 system was evolved to System 800xA in a stepwise process where the installation was carried out on-line with no interruptions to production, on time and within budget.

Encouraged by this success, Arkema now looked to evolve the Emerson Provox system of its St Auban plant located in the southern French Alps
Honeywell TDC 3000 migration to ABB was a stepwise process with the installation carried out on-line and with no interruptions to production

Technical and operational challenges

At St Auban, the specific problems that Arkema faced included obsolete Provox HMIs in the form of Provue consoles, difficulties with and high costs of repair to Provox keyboards, and three controller types (MUX, PCIU and DCU) that would soon be obsolete. On the other hand, one of the current controllers (UOC) could be retained for many years to come. At the start of the evolution, the system architecture included 5000 IOs.

Arkema also had other requirements. Existing equipment had to be used to make all connections and non-obsolete equipment was not to be replaced. Evolution also had to be done on-line to avoid production shutdowns. What’s more, as a worldwide supplier of speciality chemicals, Arkema demanded global support from its third-party replacement supplier. All these needs fitted in with ABB’s clear-cut evolution strategy.
Existing equipment had to be used to make all connections and non-obsolete equipment was not to be replaced.

ABB’s clear-cut evolution strategy

This is based on protecting the security of long-term user investments and evolving in a step-wise manner that best meets users’ overall processing and automation goals – and ‘only when it makes economic sense’.

In fact, when Arkema looked for a control systems supplier to meet its expressed need – “to provide an alternative evolution solution to Emerson and replace only what is necessary” – it found that ABB was the only vendor able to deliver.

A four-step evolution path for St Auban plant

David Le Duc, ABB Third-Party Systems Evolution Manager
“ABB was the only vendor able to provide an alternative evolution solution to Emerson and replace only what was necessary.”

David Le Duc, ABB Third-Party Systems Evolution Manager in Marseille describes the third-party replacement of Emerson’s Provox as a typical example of how ABB handles evolution projects.

Based on the St Auban plant’s system architecture at the beginning of the project and the stated requirements, ABB proposed a four-step evolution solution with System 800xA architecture:

  1. Replacing the first of the Provue consoles by a System 800xA HMI
  2. Implementing System 800xA Batch Manager
  3. Replacing the MUX, DCU and PCIU controllers with ABB’s AC 800M
  4. Replacing the UOC controllers with AC 800M when needed (but not before)

The main tool used to achieve this solution is ABB’s Connect to the Emerson Provox system. The Connect provides connectivity for interfacing the existing Provox system with System 800xA architecture. In addition, ABB AC 800 Connect provides the same function for the AC 800M controllers that replaced the three ageing Provox models.

Installing the new controllers required no modification to the operator interface since communication had been simplified between the ABB controllers (via AC 800 Connect) and the one for the Emerson Provox system.

To achieve step-wise evolution, ABB is using its unique Connect tools for interfacing the existing third party systems with System 800xA architecture
Visit us or get a live demo remotely

Putting new system architecture into production

With everyone agreed that this was the right strategy to adopt, the replacement started with the HMI and Batch applications phases. These involved a number of separate operations, including collecting Arkema process data (graphic displays, DSR, Templates, etc.), loading the Arkema database into the ABB environment, and further developing the graphic displays, operator interface and batch procedure. Final configuration of the system, e.g. graphic displays, alarms, etc., was done by Arkema.

Next in line was to assess the new architecture and phase it into production.

System 800xA was put on top of Provox and used in production over eight months of standard operations. In Phase 1, both systems were in parallel, with ABB’s in read-only for one month. Phase 2 saw both systems still in parallel, but with System 800xA architecture now being used for standard operation.

Finally, the HMI evolution was completed by transferring all Batch applications to run on System 800xA, and by stopping and disconnecting the old Provue consoles. Finally, the HMI evolution was completed by transferring all Batch applications to run on System 800xA, and by stopping and disconnecting the old Provue consoles.
ABB evolved from an old system to the new by first allowing both running in parallel and then smoothly moving in phases
Graphic display from one stage of Arkema’s PVC production process after the installation of the System 800xA HMI

Arkema’s new control environment in St Auban. Modern System 800xA operator workstations with advanced HMIs have replaced elderly Provue consoles and Provox keyboards.

Current status and future work

The newly operational System 800xA meets the chemical group’s requirement for secure, cost-effective production with increased capacity. It has great integration capabilities, is flexible, and has a state-of-the-art operator environment. As the response time measurements in the table demonstrate, its performance is also superior to that of the previous Emerson Provox installation.

Work still to be done mainly involves replacing the remaining obsolete controllers with AC 800M. This will be started soon. The UOC controllers will, stay in place for a further 10 years. Throughout this time, ABB’s global pool of know-how for helping evolve third-party control systems remains at Arkema’s disposal.

Despite facing some tough technical challenges, ABB took on the job and succeeded handsomely. Without having to shut down its operations, Arkema now has a secure, efficient and future-proof System 800xA running all its production batches.

Secure, cost-effective production with increased capacity, state-of-the-art operator environment and superior performance are direct results of the modernization

Learn more

Download PDF

including performance test results for Arkema St Auban - Provox Connect solution
More on System 800xA
More control systems connectivity and modernization solutions from ABB
Simulate 3rd party system evolution
Select region / language