| Characteristics |
Technical data |
| Path Lengths |
2, 4, 8 mm (2000 series)
25, 50, 100, 150 mm (4000 series) |
| Parameters |
Nitrite (NO2) |
| Range |
Depends on model selected. Refer to range chart |
| Accuracy |
± 1% FS |
| Units |
mg/L, ppm |
| Sampling Time |
30 seconds |
| Calibration |
Factory calibrated. Can be field adjusted if needed.
|
| Cleaning |
In-situ cleaning makes cleaning quick and easy. Automatic chemical cleaning is optional. |
| Self-Diagnostic |
Detection and diagnosis of internal system fault |
| Operator Interface |
Five push buttons to control a comprehensive hierarchical menu system |
| Display |
4 line x 20 character backlit LCD with LED alarm indicator |
| Alarms |
Dry contact terminals allow for operator configurable alarms for:
high and low set points, low lamp output, leak detected, system fault, etc. |
| Humidity Control |
Humidity sensor with large regeneratable desiccant system |
| Outputs |
Self-powered 4-20mA, RS232 serial for PC |
| Wavelengths |
UV and visible light wavelengths |
| Light Source |
LED |
| Flow Rate |
300 - 1000 mL/min |
| Pressure Rating |
20 PSI maximum |
| Fluid Connections |
1/4" OD tube push-in fittings |
| Wetted Materials |
Kynar, Polyethylene, Quartz, SS 316L, Viton |
| Electrical |
24VDC 40W power adapter (accepts 90-250VAC 50/60Hz) |
| Ambient Temp. |
0 to 45°C (32 to 113°F) |
| Water Temp. |
0 to 90°C (32 to 194°F) at 21°C (69.8°F) Ambient temperature |
| Storage Temp |
-20 to 60°C (-4 to 140°F) |
| Enclosure |
NEMA 4X, wall mountable |
| Weight |
22 lb (2000 series)
24 lb (4000 series) |
| Dimensions |
17”H x 14.25”W x 7.5”D (2000 series)
17.75”H x 15.5”W x 6.75”D (4000 series) |
| Warranty |
2-year limited warranty (Extended care packages available) |
| Analyzer Upgrades |
Cell Modem, Dual Transmitter |
* Technical Specifications are subject to change without notice.
* Water temperature range based on material compatibility only. Contact ABB to verify application.