| Characteristics |
Technical data |
| Path Lengths |
0.5, 1, 2, 4, 10 mm (1000 series)
1, 2, 4, 8 mm (2000 series)
25, 50 mm (4000 series) |
| Parameters |
BOD, COD, TOC, DOC, UV254, UVT, TSS, nitrate, nitrite, nitrite & nitrate, algae, permanganate,
monochloramine, colour, dyes, pesticides, polymers, oil in water, diesel fuel, BTEX, surfactants,
soaps, black liquor, H2S, O3, THM, HAA, contaminant alarms,
spectral fingerprint, custom alarm |
| Range |
Depends on model selected. Refer to range chart |
| Units |
Parameter specific (mg/L, cm-1, % or PCU) |
| Sampling Time |
1 minute |
| Calibration |
Factory calibrated. Field adjustment of calibration is possible. |
| Cleaning |
In-situ chemical cleaning makes cleaning quick and easy. Automatic chemical cleaning is optional. |
| Self-Diagnostics |
Detection and diagnosis of internal system fault |
| Alarms |
Dry contact terminals allow for operator configurable alarms for:
high and low set points, low lamp output, leak detected, system fault, etc. |
| Humidity Control |
Humidity sensor with large plug-in regenerating desiccant system |
| Wavelengths |
Full scanning between 190-750 nm |
| Light Source |
Deuterium and Tungsten |
| Lamp Life |
4000 hrs. each |
| Flow Rate |
500 - 1000 mL/min (1000 series)
300 - 1000 mL/min (2000 and 4000 series) |
| Pressure Rating |
85 PSI maximum (1000 series)
20 PSI maximum (2000 and 4000 series) |
| Fluid Connections |
3/8" OD tube push-in fittings (1000 series)
1/4" OD tube push-in fittings (2000 and 4000 series) |
| Wetted Materials |
Kynar, FEP, Quartz, SS316L, Viton (1000 series)
Kynar, Polyethylene, Quartz, SS 316L, Viton (2000 and 4000 series) |
| Electrical/Comm. |
From UviTec Controller Pro |
| Ambient Temp. |
-20 to 60°C (-4 to 140°F) |
| Water Temp. |
0 to 35°C (32 to 95°F) at 21°C (69.8°F) Ambient temperature |
| Enclosure |
NEMA 4, wall mountable |
| Weight |
44 lb |
| Dimensions |
19.0"H x 20.5"W x 9.0"D |
| Warranty |
2-year limited warranty (Extended care packages available) |
| Sensor Upgrades |
Cooling Upgrade I, Cooling Upgrade II |