Your country has been recognized as

Finland

, below you can find the list of distributors in your Country with products on stock. If your location was recognized incorrectly or you want to change Country, choose from the drop-down list.

Detaljerad information för: DG/S1.64.5.1

Den här sidan innehåller tekniska datablad, dokumentbibliotek och länkar till relaterade erbjudanden för denna produkt. Om du behöver annan information, kontakta oss via formuläret längst ned på sidan.

Datablad
Nedladdningar
Var kan man köpa online

DG/S1.64.5.1

Generell information

  • Utökad produkttyp:
    DG/S1.64.5.1
  • Artikelnummer:
    2CDG110273R0011
  • EAN:
    4016779067201
  • Katalogbeskrivning:
    DG/S1.64.5.1 DALI Gateway, Premium, 1-fold, MDRC
  • Beskrivning, lång:
    Single-Master DALI Controller certificated acc. to DALI-2 (EN 62386). The device is used to control DALI or DALI-2 devices via ABB i-bus® KNX. Two DALI output for up to 64 DALI participants. DALI power supply is integrated. Control and status feedback is carried out via KNX per DALI participants (64), with lighting groups (16), together in broadcast or per scenes (16). DALI devices type DT1 (Self-contained emergency converter acc. EN 62386-202) and type DT8 (colour temperature Tc & RGB(W) acc. EN 62386-209) will be supported. Other DALI devices e.g., DT6 can be controlled via standard DALI commands acc. to EN 62386-102.
    Extensive fault and error messages are available. Slave-, staircase-, force-, block- and scene-function are integrated. Colour can set and dim, HSV(W)-, Dim2Warm-, HCL-function, 4 sequencer per DALI output can be used. A standby switch-off in combination with a KNX switch actuator (e.g., SA/S) and the integration of the DALI Gateways into a load control system are possible. By means of KNX and DT1 converter different emergency tests (e.g., function and duration test) can be triggered, test results are transferred back to KNX.
    For diagnostic use and individual change of the DALI address or group assignment a separate software tool (ABB i-bus® Tool) is available.

Installation

Teknisk data

  • Datablad, teknisk information:
    2CDC507175D0211
  • Hjälpspänning AC/DC:
    110 ... 230 V AC
  • Inspänning (Uin):
    85 ... 264 V AC
  • Effektförlust:
    2 W
  • Kommunikationsgränssnitt:
    DALI
  • Antal utgångar:
    1
  • Antal LED´s:
    1
  • Compatible Bus Systems:
    KNX (TP)
    DALI
  • Produktområde:
    KNX
  • Software Updateable:
    Yes
  • Integrerad webbserver:
    No
  • Manual Operation:
    Yes
  • Färg:
    light grey
  • Antal batterier:
    0

Material Compliance

  • RoHS information:
    2CDK507178D2701
  • RoHS-status:
    Following EU Directive 2011/65/EU
  • REACH Declaration:
    9AKK108468A9644
  • REACH Information:
    False - does not contains substances > 0.1 mass percentage
  • Conflict Minerals Reporting Template (CMRT):
    9AKK108468A3363
  • SCIP:
    4040c569-de3a-44cb-9a18-14dbb8ac76fd Germany (DE)

Miljö

  • Omgivningstemperatur luft:
    Operation -5 ... +45 °C
  • Skyddsform:
    IP20

Dimensioner

  • Width in Number of Modular Spacings:
    4
  • Bredd netto:
    70 mm
  • Höjd netto:
    90 mm
  • Djup netto:
    63.5 mm
  • Nettovikt:
    0.133 kg
  • Måttskiss:
    2CDC072033F0015

Certifikat och deklarationer

Klassificeringar

  • ETIM 9:
    EC001099 - System interface/media gateway for bus system
  • eClass:
    V11.0 : 27143136
  • UNSPSC:
    43222605
  • IDEA Granular Category Code (IGCC):
    6809 >> System interface/media gateway for bus system
  • WEEE-kategori:
    5. Small Equipment (No External Dimension More Than 50 cm)
  • WEEE B2C / B2B:
    Business To Consumer
  • Kontakta oss

    Skicka in din förfrågan så kontaktar vi dig

    Kontakta oss
Select region / language

Populära länkar