ABB Robotics Training Center Thailand

About ABB Robotics Training Center in Thailand

Located in the heart of the Bangpoo Industrial Estate, Samut Prakan, our state-of-the-art Robotics training facility offers a comprehensive array of courses designed to cater to all levels of expertise, from foundational to advanced techniques. Our programs are meticulously crafted to equip your team with the essential knowledge and skills necessary to enhance operational efficiency and drive optimal business performance. Whether you are looking to upskill your workforce or integrate cutting-edge robotic solutions, our training ensures that your staff are prepared to meet the challenges of today's dynamic industrial landscape effectively.

Where we are?

ABB Automation (Thailand) Co., Ltd.

322 Moo 4, Bangpoo Industrial Estate
Soi 6, Praeksa, Muang
Samutprakarn 10280
Tel: +66 2 665 1000

Click here to view map

Upcoming event

EVENT

New Robotics Training Center Opening ceremony

Month XX, 2024

Training

IRC5 - Basic Programming Course

Month XX, 2024

Training

IRC5 - Electrical Troubleshooting Course

Month XX, 2024

Training

IRC5 - Advanced Programming Course

Month XX, 2024

Our training courses

Basic Programming - IRC5

Electrical Troubleshooting - IRC5

Advanced Programming - IRC5

Basic Programming - Collaborative

Course type

This course is instructor-led.
Approximately 75% of the time is used for hands-on exercises.

Course duration
The course will take approximately 30 hours, exact
schedule may differ between countries.

Course objectives
Upon completion of this course, the student should be able to:

• Jog the robot both linear, reoriented and axis-by-axis.

• Structure a program using routines, modules

and named data.

• Understand the difference between Task and Program.

• Program basic movements.

• Recognize if the revolution counters are ok

and to reset if needed.

• Create and define tooldata.

• Create and define wobjdata.

• Save programs and backup the system.

• Create a virtual copy of a real controller.

• Use RobotStudio for editing the robot program

both online and offline.

Student profile

This course is the first step to become a robot programmer

and for personnel with a need to modify existing programs.

Prerequisites

Basic PC knowledge and a technical background are

facilitating.

Submit enquiry

Course type

This course is instructor-led.

Approximately 50% of the time is used for hands-on exercises.

Course duration
The course lasts 3 days

Course objectives

Upon completion of this course, the student should

be able to:

• Work systematically when troubleshooting

• Troubleshoot based on fault symptoms/units

• Use practices that is safe for both equipment and personnel.

• Update revolution counters

• Calibrate the robot

• Reinstall RW5 and RW6 systems

• Configure ABB IO units

Student profile

This training is targeted to service engineers and personnel
performing electrical service.

Prerequisites

Participants must be able to read circuit diagrams
and use a multi-meter.

Submit enquiry

Course type

This course is instructor-led.

Approximately 75% of the time is used for hands-on exercises.

Course duration
The course lasts 3 days.

Course objectives

Upon completion of this course, the participant

will be able to:

• Create and define work objects and advanced tooldata

• Use RobotStudio for editing the robot program

both online and offline

• Create and use modules, routine and data

• Program search instructions

• Program position displacement instructions

• Program error handling instructions

• Program interrupt instructions and traps

• Use joint configuration instructions

• Use motion control instructions

Student profile

Advanced Programming is intended for

students that have attended the basic

programming course but require greater

knowledge of programming features.

Prerequisites

You should have completed a basic

programming course for ABB Robots or have

corresponding experience.

Submit enquiry

Course type

This course is instructor-led.

Approximately 75% of the time is used for hands-on exercises.

Course duration
The course will take approximately 30 hours, exact schedule may differ between countries.

Course objectives
Upon completion of this course, the student should be able to:

• Move the robot using lead-through and the joystick.

• Structure a program using routines, modules and named data.

• Understand the difference between Task and Program.

• Program basic movements.

• Check and reset revolution counters.

• Create and define tool data and wobjdata.

• Save programs and backup the system.

• Create a virtual copy of a real controller.

• Use RobotStudio for editing the robot program both online and offline.

• Use Skill Creator to create custom blocks for Wizard.

Student profile

This course is the first step to become a robot programmer for collaborative robots.

Prerequisites

Basic PCknowledge and a technical background are

facilitating.

Submit enquiry

Basic Programming - OmniCore

Operator Course - OmniCore

Electrical Troubleshooting - OmniCore C30

Electrical Troubleshooting - OmniCore C90XT

Course type

This course is instructor-led.

Approximately 50% of the time is used for hands-on exercises.

Course duration
The course lasts 5 days

Course objectives

Upon completion of this course, the student

will:
– Have a basic knowledge about the mechanics of ABB robots

– Be able to jog the robot both linear, reoriented and axis-by axis

– Be able to structure a program using routines, modules and named data

– Understand the difference between Task and Program

– Be able to program basic movements

– Be able to recognize if the revolution counters are ok and to reset if needed

– Be able to create and define tooldata

– Be able to create and define wobjdata

– Be able to save programs and backup the system

– Be able to create a virtual copy of a real controller – Be able to use RobotStudio for editing the robot program both
online and offline

Student profile

This course is the first step to become a robot programmer and for personnel with a need to modify existing programs

Prerequisites
Basic PC knowledge and a technical background are facilitating

Submit enquiry

Course type

This course is instructor-led.

Approximately 75% of the time is used for hands-on exercises.

Course duration
The course lasts 2 days

Course objectives

Upon completion of this course, the student

will:
– Have general knowledge about ABB robots and the OmniCore controller
– Be able to jog the robot to any position with appropriate motion mode

– Know what RobotStudio is

– Be able to start and stop the robot program in a safe manner
– Be able to restart the program from the start
– Be able to backup and restore the data and programs in the controller
– Know how to perform a warmstart of the controller
– Be able to modify robot positions if necessary

– Know when and how to deactivate motion supervision

– Be able to read and save event logs

– Know how to read the values of digital inputs and manipulate digital outputs

Student profile

This course is intended for personnel working

as, or about to become, robot operators.

Prerequisites
No prerequisite

Submit enquiry

Course type

This course is instructor-led.

Approximately 50% of the time is used for hands-on exercises.

Course duration
The course lasts 5 days.

Course objectives

Upon completion of this course, the participant

will be able to:

– Work systematically when troubleshooting

– Troubleshoot based on fault symptoms/units

– Use practices that is safe for both equipment and personnel

– Update revolution counters

– Calibrate the robot

– Reinstall RW7 systems

– Configure ABB IO units

Student profile

This training is targeted to service engineers

and personnel performing electrical service.

Prerequisites

Participants must be able to read circuit diagrams and use a multi-meter.

Submit enquiry

Course type

The course is instructor-led.

Approximately 50% of the time is used for hands-on exercises.

Course duration

The course lasts 4 days.

Course objectives

Upon completion of this course, the participant

will be able to:

– Work systematically when troubleshooting

– Troubleshoot based on fault symptoms/units

– Use practices that is safe for both equipment and personnel

– Update revolution counters

– Calibrate the robot

– Reinstall RW7 systems

– Configure ABB IO units

Student profile

This training is targeted to service engineers

and personnel performing electrical service.

Prerequisites

Participants must be able to read circuit diagrams and use a multi-meter.

Available soon

Showroom gallery

Brand_Pattern_Background_white_8-Small

Need our support?

If you have any queries regarding our center, please submit your question via this form. Our team will contact you as soon as possible.

Submit your enquiry

Select region / language

Europe
Americas
Middle East and Africa
Asia and Oceania

Global - English
Argentina - Spanish
Aruba - Spanish
Bolivia - Spanish
Brazil - Portuguese
Canada - English | French
Chile - Spanish
Colombia - Spanish
Costa Rica - Spanish
Dominican Republic - Spanish
Ecuador - Spanish
El Salvador - Spanish
Guatemala - Spanish
Honduras - Spanish
Mexico - Spanish
Panama - Spanish
Paraguay - Spanish
Peru - Spanish
Puerto Rico - Spanish
United States of America - English
Uruguay - Spanish

Global - English
Australia - English
Bangladesh - English
China - Chinese | English
India - English
Indonesia - English
Japan - Japanese
Kazakhstan - Russian
Malaysia - English
Mongolia - Mongolian | English
New Zealand - English
Philippines - English
Singapore - English
South Korea - Korean
Sri Lanka - English
Taiwan (Chinese Taipei) - Chinese - Traditional
Thailand - English
Vietnam - English