Cyberex Digital Single Phase Charger Specifications

¿Necesita más información?

General data

Current Ratings

6, 12, 16, 20, 25, 30, 40, 50, 60, 75, 100 A

AC Input

Voltage

Group 1 (6–25ADC)
120/208/240VAC Multi-tap 60Hz; 480VAC 60Hz; 220, 380/416VAC 50/60Hz; 
550-600VAC 50/60Hz
Group 2 (30–100ADC)
120, 208, 240 or 480VAC 60Hz; 220VAC, 380 or 416VAC 50/60Hz; 
550–600VAC  50/60Hz

Voltage range

+10%, -12%
Input Frequency Tolerance
 ±5%
Efficiency
 85-90% typical for 130VDC at 50-100% load
DC Output
Voltage ratings 12, 24, 48, or 130 VDC nominal
Continuous ratings 110% rated current at maximum equalized voltage at 50º C
Voltage regulation ± 0.25% for line, load, frequency and temperature variations
Electrical noise 32dBrnc
Ripple 12/24/48VDC – Unfiltered on battery 1% Vrms
– Filtered on battery 30mVrms
– Filtered off battery 1% Vrms
– Battery Eliminator 30mVrms
130VDC: – Unfiltered on battery 2% Vrms
– Filtered on battery 100mVrms
– Filtered off battery 2% Vrms
– Battery Eliminator 100mVrms
 Surge Withstand Capability  Meets IEEE-472/ANSI C37.90a

Communications

User interface/indications

Digital LED Meter

Communication ports

Modbus and Ethernet Communications ports available

Environmental

Operating ambient temperature

0–122°C (-18º C to 50º C) without derating

Operating altitude

10,000 feet (3,000 meters) above sea level without derating load
Relative humidity 5-95% non-condensing
Audible noise Less than 65 dBA at any point 5ft. (1.5m) from any vertical surface of enclosure

Technical specifications are subject to change without notice. 


Select region / language