UviTec Clean System

The UviTec Clean automatic chemical cleaning system offer the most effective method for cleaning optical sensors. Brushes and wipers rely on moving parts that often wear over time and are ineffective at removing tough fouling. Cleaning fluid and frequency can be set to site specific needs, ensuring the target fouling agents are removed effectively and drift is minimized. The automatic cleaning cycles save time and lower maintenance while improving overall operation and accuracy of the instrument.

Features & Benefits

For use with pressurized sample water (300-1000 ml/min)
Automatic preprogrammed cleaning cycles
Limits flow cell fouling and enhances performance
Saves time and lowers maintenance
1 L cleaning fluid container
2-year limited warrant

Overview

Downloads

Service

Overview

General Specifications:

Characteristics	Technical data
Cleaning Frequency	User configurable
Cleaning Capacity	1L storage container, cleaning fluid recapture feature reduces fluid replenishment frequency
Min Flow Rate	300 mL/min
Max Flow Rate	1000 mL/min
Max Pressure	20 PSI
Alarms	Leak, Cleaning Fluid Low, Cleaning Fluid Empty
Electrical/Communication	From controller/ analyzer
Dimensions	12.0”H x 14.0”W x 7.5”D (Real Clean System I) or 13.75”H x 16.0”W x 7.5”D (Real Clean System II)
Enclosure	NEMA 4, wall mountable
Fluid Connections	1/4" tube push-in fittings
Storage Temp.	-20 to 60°C (-4 to 140°F)
Operating Temp.	0 to 45°C (32 to 113°F)
Weight	10 lbs.
Warranty	2-year limited warranty