Tightening environmental legislation, coupled with customer expectations of quality and availability are seeing continuous water analysers being used to measure an extensive range of parameters, from dissolved oxygen in aeration processes through to chlorine and turbidity.

Capable of taking ongoing readings which can be automatically relayed to a central monitoring system, continuous water analysers help to eliminate the delays and added uncertainties associated with extractive testing methods.

Despite their advantages, however, the performance of continuous water analysers is only as good as the condition of the analyser itself.

With the introduction of ever more stringent standards by the UK Environment Agency, it is particularly important to maintain analysers to the highest possible levels as a matter of best practice. In the event of a water quality incident occurring, operators must demonstrate that their monitoring and measurement equipment was being correctly maintained in accordance with recognized best practice.

The following provides some recommendations for measures that can be put in place to help ensure continued effectiveness.

Many of the latest generation of analysers incorporate self-diagnostic features and alarm capabilities to warn when something is wrong. Although these signals are useful in determining when maintenance needs to be performed, it is nevertheless advisable to have a preventive maintenance regime in place to help extend the life of the instrument.

Reagents are crucial for producing the chemical reaction needed for an accurate measurement to take place. As such, it is important to ensure that reagents are replenished as soon as they are exhausted. Checking reagent consumption regularly will help you predict the best time to carry out a changeover. As reagents have a shelf life, check the expiration date before exchanging the used reagent with the new one. In addition, regular maintenance will also help to show whether the reagent is being consumed at the rate that should be expected for the application. Under or over consumption can be indicative of a problem in the analyser’s fluid handling system, such as a blockage or restriction.

Ensuring that your analyser is properly calibrated will have a material impact on its ability to deliver continued measurement accuracy.  Errors can arise when changing reagents, with potential failures arising if the reagents are not fitted properly, if tubing is blocked or restricted or if the reagent lines were not properly primed.  Failure of a routine calibration can also be symptomatic of issues within the analyser, such as blocked tubes and valves, leaking seals or contamination of the reference standard.

It is worth checking analyser systems that are in direct contact with the process, as sensors can become obstructed or damaged as they often bear the brunt of any adverse conditions.  In waste water treatment processes in particular, sensors can quickly become fouled by the build-up of organic matter or subjected to abrasion by sediment. The accuracy of electrochemical sensors used in dissolved oxygen monitoring applications, for example, can quickly become impaired due to fouling of the sensor membrane.

Follow the manufacturer’s recommendations regarding the replacement of any key components. Depending on the type of analyser being used and its  application, consider changing parts such as tubing, measurement cells and seals and diaphragms on a yearly or bi-annual basis.

Given the diverse range of parameters that are measured in water and waste treatment processes, it is difficult to set a universal rule when it comes to setting the frequency of maintenance checks. In most cases, it is possible to create a maintenance routine by monitoring the nature of past breakdowns with any issues that have been recorded, such as fouling, abrasion or measurement variations. By using these as a guideline, it will then be possible to create a maintenance routine that can help to safeguard against future occurrences. In addition, information from the device manufacturer should also be taken into account in order to further optimise performance.

Another factor that can affect the way that an analyser is maintained is where it sits in its lifecycle. This should take into account the model, age and make of the analyser. Models that are at the start of their product lifecycle will be well-supported, with ready spares availability. This may differ for models from older product ranges, where spares and the expertise to service them may not be as readily available. Dealing with reputable manufacturers can help to minimise this, as they are more likely to be able to support older products or else to recommend a suitable upgrade path with an alternative replacement.

For more information:
Call 01480 488080 or
Email abb.service@gb.abb.com (ref. ‘continuous water analyser service’).