UviTec Color Sensor

The UviTec bypass Color sensor provides affordable real-time measurement of color changes in water or wastewater in accordance with ISO 6271-2016:05. The sensor provides superior measurement performance across multiple wavelengths of light using LEDs. Designed to meet the needs of many monitoring applications, it offers multiple sensor path length selections to meet the desired measurement range.

Features & Benefits

Affordable real-time color monitoring
Multiple wavelength sensor uses LED technology for superior measurement performance
Wastewater to high purity measurement ranges
Operator friendly, low maintenance LED design
Reagent free optical measurements
In accordance with ISO 6271-2016:05
Simple to install and operate

Simple, Plug & Play Colour Monitoring

The UviTec bypass Color sensor is a cabinet style instrument installed directly on a wall, railing or system backboard. Sample is supplied to the sensor from a pressurized source or alternatively, from an open-channel using an accessory pumping/cleaning system. The sensor must be connected to a UviTec controller for operation.

EXAMPLE CONFIGURATION

UviTec Controller
For affordable, user friendly operation and control
Color Sensor
For real-time continuous color measurement
UviTec Clean System
For low maintenance automatic cleaning

Multiple sensors can be added to UviTec's controllers to expand water quality monitoring capabilities.

Simple to install, easy to operate, no reagents and no waiting for lab results.

Overview

Downloads

Service

Overview

General Specifications:

Characteristics	Technical data
Path Lengths	1, 2, 4, 8 mm (2000 series) 25, 50, 100, 150 mm (4000 series)
Parameters	Colour
Range	Depends on model selected. Refer to range chart
Range	± 0.5% full scale
Units	PCU, PtCo or HU (hazen units)
Sampling Time	30 seconds
Calibration	Factory calibrated. Field adjustment of calibration is possible.
Cleaning	In-situ cleaning makes cleaning quick and easy. Automatic chemical cleaning is optional.
Self-Diagnostic	Detection and diagnosis of internal system fault
Alarms	Dry contact terminals allow operator configurable alarms for: high and low set points, low lamp output, leak detect, system fault, etc.
Humidity Control	Humidity sensor with large regeneratable desiccant system
Wavelengths	Visible (VIS)
Light Source	LED
Flow Rate	300 - 1000 mL/min
Pressure Rating	20 PSI maximum
Fluid Connections	1/4" OD tube push-in fittings
Wetted Materials	Kynar, Polyethylene, Quartz, SS 316L, Viton
Electrical/Comm.	From controller
Ambient Temp.	0 to 45°C (32 to 113°F)
Water Temp.	0 to 90°C (32 to 194°F) at 21°C (69.8°F) Ambient temperature
Enclosure	NEMA 4X, wall mountable
Weight	22 lb (2000 series) 24 lb (4000 series)
Dimensions	17"H x 14.25"W x 7.5"D (2000 series) 15.82”H x 13.82”W x 9.00”D (4000 series)
Warranty	2-year limited warranty (Extended care packages available)