Global site

ABB's website uses cookies. By staying here you are agreeing to our use of cookies. Learn more

AC 700F controller

The AC 700F controller has a small footprint and supports PROFIBUS. It can support up to eight direct I/O modules.

The AC 700F controller, as a member of Freelance, has numerous advantages over a PLC based solution:
  • The distributed process control system (DCS) simplifies engineering, commissioning and maintenance of the automation system.
  • Visualization is directly incorporated into the engineering, making configuration particularly straightforward.

AC 700F can also be extended with Profibus Remote I/O units. In addition, field devices can be connected to AC 700F. Thanks to the flexibility of Ethernet and its small footprint, AC 700F can also be placed in junction boxes in non-hazardous areas out in the field as competitive, intelligent Ethernet I/O.

 

Are you looking for support or purchase information?

Benefits
Technical Data
Services
  • Very small footprint
  • SD card support
  • Typically around 300 I/Os per controller
  • Support for PROFIBUS, Modbus
  • Direct or remote connection of I/Os
 AC 700F Overview of Technical Data

Processor

Freescale PowerPC

Program memory (battery backed up)

2 MB SRAM

Internal memory

8 MB SDRAM, 4 MB FLASH ROM

Processing time for 1000 instructions

1.667 ms for binary instructions
2.322 ms for word instructions
3.125 ms for floating point instructions

SD card support
For controller backup and firmware update

Max. number of I/O modules per CPU

8

Power supply

CP-C 24 / 5.0, power supply, 5 A / 24 VDC output
CP-C 24 / 10.0, power supply, 10 A / 24 VDC output

Max. power dissipation within the module

10 W

Current consumption from 24 VDC

80 mA (max)

Inrush current at 24 VDC

1 A²s

Data backup source

Lithium battery

Data buffering time at 25 °C / 77 °F

Approximately 1.5 years

Battery low indication

Warning indication issued about 2 weeks before the battery charge becomes critical

Real-time clock, with battery backup

Yes

Multitasking program execution
Cyclic (equidistant)
Cyclic (as fast as possible)
Event driven

8 tasks
1 PLC type task
Upon any of these events: “Run, Stop, Warm start, Cold start, Error“

   
Dimensions, etc.
 
Width x height x depth (CPU without the Terminal Base) 67.5 x 76 x 54 mm / 2.66 x 2.99 x 2.13 inches
Weight (CPU without Terminal Base) 150 g / 5.29 oz
Mounting position horizontal or vertical with horizontal or vertical with de-rating (50 % output load, reduction of maximum temperature to 40°C/ 104°F
Loading documents

Related offering