Type SAM

Single piece, liquid tight, high temperature 316 Stainless Steel fitting suitable for food zone non-contact
areas

  • Unique single piece design
  • 316 Stainless Steel 
  • Face seal materials adhere to FDA (Food and Drug Administration) and European Food Contact regulations
  • IP67, IP68 & IP69 protection
  • Approvals CE, BS EN 61386-1,-23, NSF14159-1-2014, NSF169-2009, UL514b 
  • Multiple thread type Metric/NPT
  • Very high corrosion resistance
  • Very high chemical resistance
  • Very high fatigue life
  • Temperature range - Static Applications: -50ºC to +130ºC
    Temperature range - Moving Applications: -5ºC to +150ºC

Typical applications

  • Suitable for food zone non-contact areas
Parts list
Documents
Related products
Additional info
Contact us
Conduit Size (A) Nominal Dimensions (mm) GID code
METRIC Part no: Metric (mm) US (Trade size) B C D E F G
SPL16/M16/SAM 16 3/8” 12.0 32.8 30.0 31.9 14.0 10.5 7TCA296120R0043
SPL20/M20/SAM 20 1/2” 12.0 35.6 32.0 35.0 18.0 14.5 7TCA296120R0044
SPL25/M25/SAM 25 3/4” 12.0 43.0 38.0 41.0 23.0 18.3 7TCA296120R0045
SPL32/M32/SAM 32 1” 12.0 51.5 45.0 49.0 30.0 24.1 7TCA296120R0046
SPL40/M40/SAM 40 1 1/4” 12.0 53.3 57.0 61.5 38.0 32.7 7TCA296120R0047
SPL50/M50/SAM 50 1 1/2” 12.0 60.2 64.0 69.0 48.0 37.7 7TCA296120R0048
SPL63/M63/SAM* 63 2” 12.0 71.4 80.0 87.0 61.0 49.0 7TCA296120R0049


* : Currently does not conform to UL514b

  1. Note: A flat surface greater than diameter “E” is required around the knockout on the box or enclosure for the face seal of the NPT
    fitting to create a liquid tight seal. (The NPT threads alone will not provide a liquid tight seal when installed in a female NPT hub)
  2. Note: Parts are maintanence free, face seal can be replaced if damaged.
  3. Note: Parts are fully cleanable and will maintain full ingress protection under normal wet cleaning condtions
Conduit Size (A) Nominal Dimensions (mm) GID code
NPT Part no: Metric (mm) US (Trade size) B C D E F G
SPL16/038/SAM 3/8” 16 15.2 43.0 30.0 31.9 14.0 10.5 7TCA296120R0053
SPL20/050/SAM 1/2” 20 19.8 43.2 32.0 35.0 18.0 14.5 7TCA296120R0054
SPL25/075/SAM 3/4” 25 20.1 46.3 38.0 41.0 23.0 18.3 7TCA296120R0055
SPL32/100/SAM 1” 32 25.0 57.9 45.0 49.0 30.0 24.1 7TCA296120R0056
SPL40/125/SAM 1 1/4” 40 25.6 60.4 57.0 61.5 38.0 32.7 7TCA296120R0057
SPL50/150/SAM 1 1/2” 50 26.0 64.7 64.0 69.0 48.0 37.7 7TCA296120R0058
SPL63/200/SAM* 2” 63 26.9 74.1 80.0 87.0 61.0 49.0 7TCA296120R0059


* : Currently does not conform to UL514b

  1. Note1: A flat surface greater than diameter “E” is required around the knockout on the box or enclosure for the face seal of the NPT
    fitting to create a liquid tight seal. (The NPT threads alone will not provide a liquid tight seal when installed in a female NPT hub)
  2. Note2: Parts are maintanence free, face seal can be replaced if damaged.
  3. Note3: Parts are fully cleanable and will maintain full ingress protection under normal wet cleaning condtions
  • Contact us

    Submit your inquiry and we will contact you

    Contact us
Select region / language