Switchgear solutions for primary and secondary distribution to suit every application. For all customers, from system integrators to end users, and all applications, from refurbishment, line extension to new installations.

An innovative solution combining protection, control, measurement and digital communication, the digital panels are designed to enable a safe, flexible, eco-efficient and smart electrical network.

ABB reclosers have over 15 years of proven field performance incorporating innovative technology and unique ABB expertise, including embedded sensors with the highest accuracy and least environmental sensitivity.

MNS intelligent switchgear and motor control is ABB’s global solution for power distribution up to 690V / 6300A / 250kA (IEC) and 600V / 5000A / 100kA (ANSI) respectively.

The design of MNS iS incorporated fully segregated power and control cable compartment for independent access. The withdrawable units are incorporates equipped with the smart sensor technology.

Global trends towards improved energy management highlight the importance of reliable and efficient power monitoring and control leading the success of energy-intensive industries.

IS-Limiter-the ultra fast solution for handling a short circuit current

UFES - Active internal arc protection for switchgear

Ensuring continuous power supply by super fast automatic transfer.

Load-shedding functionality for independent power networks.

The Arc Guard TVOC-2 builds on the well-appreciated TVOC design and offers unmatched arc monitoring.

Our exhaustive range of equipotential bonding and transient overvoltage surge protection devices (SPDs) providing fully coordinated protection against transient overvoltages.

More than 1,300 standard AC surge protector configurations. AC devices include products for facility-wide installation, prewired units for equipment-level protection and custom-tailored solutions for OEMs.

DuraGard® - Light industrial applications: Waterproof (1000-PSI water test). Areas where there are size constraints, chemicals, moisture, high water pressure and the need for waterproof rather than water-resistant protection 

MaxGard® - Heavy industrial applications: harsh environments and extreme conditions such as explosion-proof areas, high-corrosion atmospheres and rugged terrain.

For oil & gas applications with demanding and corrosive environments it can be hard to find plugs and sockets.

With robust design, specific safety features and user friendly installation they fit very well into our IP&S offering.

From the smallest inside component to the outer tough shell, ABB’s pilot devices are pieces of engineering ingenuity. They are reliable, flexible and available worldwide.

Compact substations are used for energy transformation in secondary distribution network from MV to LV or LV to MV.

Modular, fully coordinated & tested units containing power equipment (MV & LV Switchgear, Transformers, Automation, …)

System pro E power is the ABB solution for main distribution switchboard with rated current up to 6300 A and short-circuit current up to 120 kA.

System pro E control - IS2 is the ABB range of metal structures and boxes for industrial automation and controlgear switchboards compliant to several international standard.

Emax 2 air circuit breakers with integrated power management, Ekip Power Controller, and with seven communication standards embedded to protect the power network and can interface with the plant’s central intelligence to keep operations running smoothly.

Tmax XT and Tmax T moulded case circuit breakers are available with advanced electronic trip unit to achieve extremely reliable and accurate protection.

As an expert in low voltage and control systems, we offer sensors that can handle rough applications and combine excellent accuracy, reliability and robustness.

Using limit switches is the easiest way to convert mechanical movement in to electrical signals. They combine different types of actuators, casings and contacts and are perfectly suited to a large variety of applications.

The Interfast pre-wiring system for PLC's offers flexible, user-friendly and competitive wiring thanks to pre-assembled cables and interface modules.

Manual motor starters are electromechanical protection devices for the main circuit. They are used mainly to switch motors manually ON/OFF and to provide fuseless protection against short-circuit, overload and phase failures.

The intelligent ABB Motor Controllers combine the functions of motor protection, motor control, fieldbus and Ethernet communication and fault diagnosis in just one device. Beside the proven UMC100 the new UMC100.3 offers even more capabilities.

ABB’s soft starters increase a motor’s lifetime by protecting it from electrical stresses. They do so by letting you optimize starting currents that with conventional starting methods put lots of stress on the motor.

ABB 3-pole contactors offer an exhaustive selection of products for simple and extreme applications as well as products with specific purposes.

AF 4-pole contactor range is a complement to the family of 3-pole AF contactors and motor protection equipment. Unmatched performance in a variety of applications and environments has made the AF contactors well appreciated by customers.

Area, flood, linear, emergency & strobe lighting for hazardous & adverse environments, available in LED and traditional HID light output.

Liquid tight metallic, stainless steel & non-metallic flexible conduit systems. Available for oil-resistant, high-temperature and low and limited fire hazard applications.

Metallic and non metallic cable glands. Available for Most Cable types, Armoured and non-Armoured. Approved for Marine Applications. ATEX, IECEx, UL, EAC Ex, InMetro, CNEX, DNV

Metallic and non metallic accessories to complement and complete installations. Drain valves to help reduce the dangers from condensation. ATEX, IECEx, EAC Ex, InMetro, CNEX, KSC

Form a strong mechanical grip and water and/or oil-resistant termination. Provide grounding continuity of cable armor. Patented powergrip grounding ring for easy installation. Designed to accommodate a broad range of cables.

- Available in Steel, Stainless Steel, Aluminum and High Temperature.
- No moisture pooling
- Double-beveled sealing
- Infinitely adjustable

- Marine-grade Type 316 stainless steel construction in rugged Form 8 design
- Ferrous Form 7 and Form 8 designs in all popular sizes and shapes

PVC-coated, hot-dipped galvanized conduit and threads. Complies fully with UL® 6, NEMA RN-1 and ANSI C80.1. Superior corrosion protection against harsh elements.

Industrial & explosion-proof conduit systems for heavy duty industrial & hazardous locations
– Comprehensive range of conduit bodies & fittings
– Explosion-proof & dust ignition-proof sealing fittings, outlet boxes, reducers & unions (Class I & Class II)

With our Blackburn and Furse brands we offer a complete range of grounding & lightning protection systems, grounding connectors and surge protection devices (SPD).

Blackburn® compression, mechanical and exothermic connectors and accessories for the creation of a safe, code compliant and reliable grounding system.

Compression lugs for power cables rated voltage up to 35kV with high-voltage insulation.

Solid, homogenous connection via special system utilizing compression tools with matching dies that forms connector & wire.

Quick, reliable change-out of electric motors with no bolting, taping or loose connections.

ABB manufacturers a comprehensive range of cable tray systems and solutions including cable ladder, perforated tray and channel tray.

Ballock, ladder type, releasable, identification, tooling

– Tensile strength up to 540N
– Flame retardant, UV resistant
– Extra-high temperature resistant -40° to 150° C
– Flammability ratings UL94V-2 and V-0
– Heat-Stabilized/UV resistant

Service plays a proactive role in generating value for our customers, across all segments, keeping their assets reliable, and protecting their investments through an extended life cycle management program.

MService is based on a simple premise: When an asset’s condition is monitored continuously, in real time, maintenance intervals can be accurately planned.

The number of elements in an electrical system can be very large and managing them can be challenging even for experienced site managers.